螺桿式空氣壓縮機

空壓機氣源系列

◆產品特點  Product features

1.  電機是特質的低轉速壓縮機專用電機，SKF軸承，絕緣等級F級，防護等級IP54，確保無故障運行。效率較同類產品高3-5%。

2.  油過濾器采用航空用高端材料過濾的旋裝式油過濾器，效果比常規濾芯高20%，有效延長主機正常使用壽命。

3.  超大容量的油氣分離器，品質優越的油氣分離元件和氣、液過濾元件，配以設計先進的三次油氣分離，含油量控制在3ppm以下，保證壓縮空氣的高質量。

4.  采用具有較高的容塵能力和較低的流動阻力設計，可濾除空氣中的微小固體顆粒，除塵效果達99.5%，確保系統的各個零部件的功能正常運行和經濟的使用壽命。

5.  設計先進的進氣閥，近期調整范圍0-100%，容調閥調節，壓力損失小，動作穩定，壽命長。

6.  世界頂級螺桿機、高效率、低轉速，轉子采用第三代5：6齒形，全球最佳的型線設計，低噪音、低耗能、低維護費用，最佳的可靠性和使用壽命。

1. Motor is characteristic of low rotation speed compressor motor， SKF bearing， special insulation is Level F， pretection class is IP54， ensure trouble-free operation. Efficiency is similar products high 3 to 5%.

2. Oil filter used in high-end materials of filter air spin loading oil filter， the effect is 20 percent higher    than conventional filter， prolong the host normal life.

3. Large capacity of the oil and gas separator， superior quality of oil and gas separation components and gas， liquid filtration components， match with advanced design of three oil and gas separation， oil content in 3 PPM， it can keep the compressed air in a high quality.

4. Design it in a higher let dust capacity and low rolling resistance， it can filter out the tiny air solid particles， dust cleaning effect of 99.5%， ensure that all parts of the system function can work well and economic service life.

5. Design is advanced into the valve， the recent adjusting range is 0 to 100%， let the valve adjust， low pressure drop， steady movement， long service life.

6. The world‘s top screw machine， high efficiency and low speed， rotor covered by use of the third class 5:6 generation of tooth shape， the world‘s bes ttype line design， low noise， low consumption， low maintenance costs， the best reliability and life.

◆主要技術參數  Main technical parameters

型號Type

DSR-10A

DSR-15A

DSR-20A

DSR-25A

DSR-30A

DSR-40A

DSR-50

排氣量/排氣壓力

Exhaust quantity / exhaust pressure

(m3/min/Mpa)

1.2/0.7

1.7/0.7

2.4/0.7

3.1/0.7

3.8/0.7

5.2/0.7

6.4/0.7

1.1/0.8

1.6/0.8

2.2/0.8

2.9/0.8

3.5/0.8

5.0/0.8

6.1/0.8

0.95/1.0

1.4/1.0

2.0/1.0

2.7/1.0

3.2/1.0

4.3/1.0

5.7/1.0